The first time you fold up a more complex origami project, you pat yourself on the back a few times and you can’t quite believe that all of those simple folds and bends and creases ended up looking so beautiful. But you imagine that mass producing origami would be painful. But actually, the more you make the more your hands just go go go and it becomes this sort of meditative, rote activity. That’s how I felt making these origami Christmas ornaments for Bluprint.
What you need
Origami paper
Glue
Scissors
String or thin yarn
Sewing needle
1. Initial folds
Start with a square piece of origami paper. Fold it in half and crease.
Open it back up and fold it in half the other way. Then, open it up again.
Fold the paper in half diagonally and open it back up. Then fold the remaining opposite corners together. This time, keep the paper folded into a triangle.
2. Shrink the triangle
Take the top point and fold it down to the left as shown above.
Push the outer corner in on itself. You should now have a smaller triangle.
3. Fold to the center
Take the right top corner of the triangle and fold it toward the center, as shown above.
Repeat this step on the other side.
Flip the paper over and trim off the two projecting tips. You’ll have yet another triangle shape.
4. Repeat
With your paper still flipped, repeat the previous step.
Once again, trim off the excess.
5. Unfold
Unfold the flaps you just made so you have a wide diamond shape.
Fold the right flap in toward the center and crease it flat, as shown above.
Then, flip the left side of this flap over to the right and crease.
Repeat this step on the opposite side.
Then, flip the right flap over to the left at the center.
Flip the whole thing over and repeat all these steps on this new side.
Keep folding!
Once everything is folded, you’ll have a small triangle.
6. Fold the corners
Fold the top corners of the triangle down.
Then, flip over the right side twice, so you have the small triangle again.
Fold down the corners here as well.
Turn the triangle to the opposite side and fold down these corners.
Just as before, flip the right side over twice and fold down the corners.
7. Open it up
Unfold the paper completely.
Fold each point down as shown.
It should now look like this.
8. String it up
Thread your string, make a knot and poke it through the very center of your origami.
Repeat all of these steps on another piece of paper, add some dots of glue to your folds and stick ’em together!
I agree, sometimes fabric projects are intimidating. What thread to use? How do I thread my bobbin again? What stitch do I use? All of these questions are why I love these two materials…felt and fabric glue. They are easy to work with and do not intimidate!
I made this project for Bluprint…here’s how you do it!
What you’ll need:
Chalk
Large felt pieces for the base
Multiple pieces of colored felt for the squares
Fabric glue
Scissors
Ruler
Make it!
1. Cut out and glue
Use chalk to draw a stocking outline on one of your large felt pieces, then cut it out. Use this as a template to cut a second, identical stocking-shaped piece.
Once the pieces are cut out, line the edges of one piece with fabric glue and stick the other piece on top. Be sure to leave the top of the stocking free of glue so you can stuff it later!
2. Make the triangles
Take your other felt colors and cut 3-by-3-inch squares. Then cut them in half to make triangles. While you’re at it, cut out one 1-by-4-inch strip of felt, and another strip that’s as long as the width of the stocking.
3. Add the strap
You’re going to need a way to hang this stocking up! Gently lift back the top right corner of the stocking and add glue. Then fold the 1-by-4-inch strip of felt in half and glue it inside the corner to find a loop.
4. Get fancy!
Before you go crazy with the triangles, add a line of glue across the top of the stockingâs front. Glue down the felt strip you cut out for this purpose.
Once the triangles are placed and the glue is dry, flip the stocking over and trim off any excess fabric that’s poking over the edges.
Now arrange the triangles on your stocking and glue âem down. (This doesn’t have to be perfect; you’ll trim the edges later.)
Yarn and cardboard…cardboard and yarnâ2 things that you should hoard if you have little crafters around. These sweet star and gift ornaments are so easy to make, you can craft a tree-full while watching Elf on DVD.
Here’s what you do…
Cut 3â stars or 2â squares from cardboard. Stick glue dots to both sides of the points and corners, and begin wrapping yarn, making sure to cross the glue dots when turning corners. Wrap until the shape is fully covered and knot the end of the yarn when finished. Tie a yarn bow around the square to make a present. Make a hanger by tying on a piece of string to the back.
Play around with other shapes and fill up that tree!
After our month in Denmark, Norway, and Sweden this summer, craft inspiration was coming out of my pores. My husband and I chose this European adventure for a few reasons, and one of the main ones was because we are big-time lovers of Scandinavian design.Â
When Gina of Willowday asked if I wanted to join her Scandinavian Holiday Creative Collective I was both flattered and intimated. I had to pare down the thousands of mental images I had of all of the beautiful things and places we had seen? I took a very long but amazing trip down iPhoto lane and looked back at pics of modern design, beautiful landscapes, and delicious pastries. I made a list of ideas with little drawings, but when I came to the one single photo I took that month that had to do with Christmas, I couldn’t help but be inspired by something more traditional and straightforward…ornaments!
These sweet little bead-and-pom-pom ornaments are super-easy, but they have a very modern, clean, yet soft feel to them. The combo of raw wood and beautiful yarn feel so Scandinavia to me!Â
If you want to make some yourself, here’s what you’ll need:
Wood beads
Yarn
Thin wire
Wire cutters
Scissors
Make it!
Make a 1-to-2-inch pom-pom. (I just use my hand as my pom-pom form, wrapping the yarn around 3 fingers.) Trim it down so it’s nice and even. Make sure to leave one long string attached.
Cut an 8-inch piece of wire and string beads onto it. Bend it into a circle so that it leaves the right amount of space for your pom-pom.Â
Trim the ends of the wire and twist to seal. Wrap the long string from the pom-pom around this joint, and tie a loop to hang.Â
If you ask ten people what their favorite moment of the The Sound of Music is, you’ll get ten different answers, full of hundreds of details and childhood memories. For some it’s the clever choreography of “So Long, Farewell,” or Julie Andrews twirling on a mountaintop, or perhaps something as specific as the dress that Liesl was wearing when she rendezvoused with Rolfe in the gazebo. But everyone has a distinct memory of what it was like to watch these scenes as a childâwishing to be a part of a family with seven kids with a magical nanny who can make a wardrobe out of curtains.
If you ask me, I’m partial to the puppet show scene. There is something about the magic of crafting characters and putting on show that stays with me. So you can only imagine my excitement when I partnered with The Rogers & Hammerstein Organization to create a Sound of Music puppet craft video. Obviously we don’t see these marionettes being built in the movie, but I can only imagine Maria organizing the children in an assembly line of production, crafting clothes, ears, noses, and strings.
So here is a version that you can make with your kids, while drinking hot cocoa, watching The Sound of Music.
What you’ll need:
Green felt
Scissors
Glue
2 tongue depressors
White straw
Paint pens: black, red, blue, white, yellow
One 1″ wooden bead
Two 1/2″ wooden beads
Seven 3/8″ wooden beads
String
1″ tall wooden spool
Needle for threading
Cut a 2″ circle from the green felt, and cut out a wide pie slice.
Fold the two cut edges over one another and glue to form a small cone.
Use the paint pens to create a face on the 1″ bead, and a torso on the wooden spool.
Thread a double-strand of string up through the painted body, a 3/8″ bead, the head, and the hat, making sure the 2 strands are hanging out the bottom.
Paint about 2 inches of a straw yellow.
Cut the straw into two 1″ segments.
Thread the 2 yellow straw pieces onto the two strings, followed by a 3/8″ bead and another 1 1/4″ piece of white straw.
Flatten the ends of the white straw pieces and fold up to make feet.
Tie the strings into double-knots and trim off the excess.
Cut a 20″ long piece of string and knot just under the head/neck. On either end, string on a 1″ piece of white straw followed by a small bead, another 1″ piece of white straw, and then the 1/2″ bead.
Double-knot the strings at the hands to secure the arms.
Glue the tongue depressors in a “+” shape and tie the hands to either end of one stick and the head string to the center.
To make a stage for your goatherd, cut a 1.5″ slit in the top of a shoebox. Paint a mountain backdrop and add yellow curtains with fabric, felt or paper.
Hanukkah is a holiday that suffers from a lack of cute, wearable gearâ antlers, santa hats, and elf ears do not coordinate with the dreidel-playing spirit. But as a holiday thatâs super festive and magical in its message, itâs about time we change that. Enter, the menorah headband…a quick little craft that you can âlightâ as the eight days progress.
Start with a simple, drugstore headband, and grab your Arts & Crafts Library for the rest. This project will take you less than 15 minutes, but the adorableness will last forever!
Need a super fun, super relaxing weekend project? Here ya go!
What you need:
Embroidery floss
Needle
White colored pencil
1. Mark your curve
Using your white colored pencil, make small marks where you want your rainbow to begin and end on your pocket. Then connect these two spots by drawing a curve. To perfect the curve of your rainbow, you can trace a frisbee, embroidery hoop or something else with a smooth curved edge.
2. Thread up
Thread your needle, knot your embroidery floss and stitch along the curve. Instead of the basic running stitch, youâre going to sew split stitches so your rainbow is a solid line. (Find the split stitch tutorial here.) Once youâve completed your first row, stitch two more rows of the same color right alongside it for a nice, heavy line.
3. Keep stitchin’!
When youâve finished your three rows, tie off the embroidery floss and snip off any excess. Repeat this process with all of your colors, until your pockets are bright and colorful!
When it comes to Halloween, I literally can find a way to leave no stone un-spooked. It happens just once a year, so I say, go all out and craft the heck out of it!
This cute slash spooky black-cat candy bowl was inspired by these kitty cat containers that I made earlier this year…just on a grander scale!
You can find the templates on the link above (just resize them to fit your box), and I’ve edited the how-to below!
When toys can teach our kids about interesting careers, I’m all for it! Barbie has come out with a line of dolls that focuses on getting kids interested in careers through pretend play. Gone are they days when Barbie is just into Ken!
This year they asked if I’d design costumes to match these dolls and this beekeeper might be my fave!
What you’ll need:
White zipper sweatshirt
Jeans
White gloves
Safari hat
White paint
White tulle
Black, white, yellow felt
1â Yellow pom-poms
Âœâ black pom-poms
Scissors
Hot-glue gun
Paint hat white. Hot-glue white tulle to the edge, leaving about a 2â gap in the back.
Patch: Cut shapes from black, white, and yellow felt and hot glue together. Hot glue to sweatshirt.
Bees: Hot-glue black pom-pom to yellow pom-pom. Cut 2 thin strips of black felt and glue around the yellow pom-pom. Cut wing shape from white felt and glue to the back of the bee.
